Free Download Canon G1000, G2000, G3000 resetter | Canon reset tool

Download canon ST 4905 reset tool Free : Hi, today I introduce the Canon Printer Rest Tool for you. When you face 5B00, 5B02, 5B04, 5B14, 1701, 1702, 1700 error on your canon printer. Canon 5B00 error means your printer's ink absorber pad is full or the printer needs to counter reset. You can simply solve this 'service required' error by using the Canon service tool. You can download Canon ST4905 resetter tool from this website.

Download canon ST4905 service tool free of cost | Canon resetter

Download Service too 4905, Download Canon ST V4905 resetter, Canon resetter tool About Canon ST 4905 reset software

Filename: Canon service tool ST 4905
File size: 4.39 MB
Download link:  Download
Password: 4905

How to counter reset on Canon G1000, G2000, G3000 printers

Step 1. First, you must enter service mode
  • Turn OFF the printer
  • Press and hold the Stop button
  • Press and hold the Power Button (Do not release both buttons) 
  • Release Stop button (Do not release Power button)
  • Holding on the Power button, press and release Stop button 5 times
  • Then release both the Power and STOP buttons together.
Step 2. Resetting steps
  1. Download Canon ST 4905 resetter tool 
  2. Extract the downloaded file
  3. Open ST 4905.exe
  4. You get a Hardware ID
  5. Open Keygen and generate an activation key
  6. Copy activation key and paste into resetter software folder
  7. Then open ST4905.exe
  8. Load an A4 paper
  9. Click SET on Clear Ink Counter section
    Download Canon ST4905, Canon G2000 resetter, Download G1000 printer service tool, Canon G3000 reset tool, Download canon service tool, Canon adjustment program
  10. Wait for the print (D=000.0)
  11. Click ok
  12. Turn OFF the printer and ON again
  13. Now your printer ready to use

How to activate Canon St4905 reset software

You can fix the following errors by using Canon service tool ST4905

Canon Error codes
5B00 error means - Service Required ( Waste Ink Counter Overflow)
Yellow light 7 times blinking error


  1. How do I get the G1000 Reseter Sowftwer? What can be given to me?


Post a Comment

Previous Post Next Post